ARTEMA CO2 module 60-10333-00 for PHiliphh EXPRESSION MR400 MRI monitor
► Brief Introduction
The ARTEMA CO2 module 60-10333-00 is a compact and reliable device used for measuring and monitoring carbon dioxide levels. It is designed to be integrated into various systems and equipment, such as HVAC systems, indoor air quality monitors, and ventilation systems. The module utilizes advanced sensor technology to accurately detect and measure CO2 concentrations in the surrounding environment. It provides real-time data and can be easily calibrated for accurate readings. The ARTEMA CO2 module 60-10333-00 is known for its high performance, durability, and ease of installation, making it an ideal solution for applications requiring CO2 monitoring and control.
► Features
side stream non‐dispersive infrared absorption technique, including multiple water trap filtration system and microprocessor control of sample handling and calibration. Method for determining end tidal CO2 measurement:
Measures peak of the expired CO2 waveform every 20 seconds.
Output: CO2 waveform, EtCO2 and FiCO2 numeric values, and respiration rate
Initialization time: Waveform displayed in less than 20 seconds, at an ambient temperature of 25°C (77°F); full specifications attained within 2 minutes
Zero calibration interval: Automatic or user requested
CO2 unit of measure: Millimeters of mercury (mmHg) or kilopascals* (kPa)
CO2 resolution: 1 mmHg (0.1 kPa)
Flow rate: 50 mL per minute ± 10 mL per minute
Data sample rate: 100 Hz
End-tidal CO2 (EtCO2) measurement range (in which the accuracy specification is met): 0 – 76 mmHg (0 – 10.1 kPa) for respiration rates ranging from 4 – 60 breaths per minute, inclusive
Inspired CO2 (FiCO2) measurement range: 3 – 50 mmHg (0.4 – 6.7 kPa) (method: lowest reading of the CO2 waveform in the previous 20 seconds)
CO2 accuracy: ± 4 mmHg (± 0.5 kPa) or ± 12 percent, whichever is greater
► Remove the Module
1. Disconnect WT1 hose from Housing wall to Agents Module fitting as shown
2. Disconnect Right-hand O2 Sensor hose (marked) to Agents Module fitting as shown. Disconnect Left-hand O2 Sensor hose (unmarked) to Agents Module fitting as shown.
3. Disconnect WT2 hose from Housing wall to Agents Module fitting as shown Disconnect the EXHAUST hose from Housing wall to Agents Module as shown
4. Disconnect 453564468841 Cable from connector on Agents Module.
5. Disconnect the 453564440531 Bracket from the Agents module by removing (2) 453564347101 Screws (M3x0.5 X 12).
► CO2 stability:
Short term drift: Not to exceed 0.8 mmHg (0.1 kPa) over a 4-hour period
Long term drift: Accuracy specification maintained over a 120-hour period
► Specification
| Storage temperature range: | +5 – 25 °C (+41 – 77 °F) |
| Transport temperature range: | ‐40 – 50 °C (‐40 – 122 °F) |
Thank you for your time! If you have other questions about our ARTEMA CO2 module 60-10333-00 for PHiliphh EXPRESSION MR400 MRI monitor, please feel free to contact us. We are always ready to serve you.
Product Tags:
|
|
ARTEMA CO2 Module 60-10333-00 For PHiliph EXPRESSION MR400 MRI Monitor Images
|
